SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Forklift Parts
Used Parts for Forklifts - Without doubt, lift truck components will eventually wear out and require replacing. The option of obtaining brand new parts could become costly so another idea is to purchase used components. This could save a lot of cash in the long run. It is a good idea to purchase used lift truck parts that have been remanufactured. These parts would ensure that you are getting parts which will work for a long time and be productive.
Worn or broken parts which are remanufactured are a very cost effective solution than rebuilding. With rebuilding parts, just the components which are worn out or broken get replaced, which means that other wearable parts can break down soon after acquisition.
Remanufacturing however provides the best assurance for second-hand components. Reproduced parts are taken apart and cleaned and then all wearable pieces are changed. All wearable parts are replaced regardless of age or wear which is one more rationale why remanufactured parts generally perform so much better. Whatever part within the part is brand new and this provides much longer life to the second-hand part. Depending on the lift truck parts that are being redone, the cleaning process and the whole remanufacturing process will differ.
After complete disassembly, the engines are oven cleaned. Several components of the engine like for example spark plugs, pistons, rings, valves, valve springs, and filters could be replaced during the remanufacture process. The engines are hot tested after reassembly to ensure that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are pressure washed, disassembled and oven cleaned. A complete examination is done in order to check for any cracks. Seals, bearings and bushings are all replaced. Normally, the replacement components used on transmission components meet OEM specifications.
A few components like for instance the alternator, the water pump, torque converters, the starter and steer axles could acquire longer serviceability after being remanufactured and having all wearable parts replaced. The electronic control in the electric forklift is maintained by the control card. This card can also be remanufactured with replacing all aged and worn out components. Unlike different lift truck parts the control card could only have the worn and aged components replaced.
Remanufactured parts are meticulously inspected upon reassembly to guarantee they are in top condition previous to being sold. It is vital when obtaining remanufactured parts to make certain they have undergone the proper testing and inspection procedures. On certain bigger parts like for example transmissions, steer axles and engines, OEM specification replacement components must be used.
The dealer of used forklifts and parts could guarantee that the remanufactured components have met OEM specifications and that these parts meet industry standards. Lots of details go into remanufacturing second-hand parts. This attention to detail offers more serviceability out of reproduced parts than the parts that were just rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Inglewood, California
forkliftpartsinglewood.com
Email Us
About Us